TANDBERG TT1260 - Manual (Page 48)

Operating the Equipment Locally
Page 3-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
3.3.3 Edit Mode
Edit mode edits the right display area and allows the user to alter control
parameters that define the TT1260 behaviour. To enter Edit mode press
the Edit pushbutton when on a page containing an editable control
parameter and the front panel is the controlling user interface. Edit may be
entered on some special pages at all times, for example on the page
defining the controlling user interface.
The Front Panel returns to Navigate mode when Edit is pressed again
(abort edit with no save) or when Save is pressed (save modified
parameter values). Processing of events from the front panel event queue
depends on the current operating mode of the front panel.
Table 3.2: Edit Mode
Action Result
Up Pushbutton Pressed Increases value of current edit parameter by one unit.
Down Pushbutton Pressed Decreases value of current edit parameter by one unit.
Left Pushbutton Pressed Moves cursor one edit parameter/parameter digit left (making that the current edit
parameter).
Right Pushbutton Pressed Moves cursor one edit parameter/parameter digit right (making that the current edit
parameter).
Edit Pushbutton Pressed Aborts edit (no save/action of any modified parameters) and returns to Navigate mode,
obtain and display current data.
Save Pushbutton Pressed Save/action new parameter values and returns to Navigate mode, obtain and display
current data.
Pushbutton LEDs are updated to indicate which pushbutton presses are still
valid as each edit pushbutton press event is processed. For example, when
the LEFT pushbutton LED is lit it indicates there are additional editable
parameters to the left of the current cursor position.
There is a maximum idle period of five minutes when Edit mode will time
out and return to Navigate mode.