TANDBERG TT1260 - Manual (Page 36)

Installing the Equipment
Page 2-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
2.7.2 TT1260 Base Unit (TT1260/DIRBAS)
Rear Panel View
Figure 2.6: Typical Decoder Rear Panel, with ASI Input and Alarm Option Fitted
ASI Out
Two BNC sockets output ASI transport streams
with a maximum data rate of 160 Mbit/s. The
specification for these connectors are given in
Section B.5.2, Audio Outputs.
ASI OUT 1/2
Table 2.4: ASI Out Connector (2 Off)
Item Specification
Connector type BNC 50 W socket
Connector designation ASI OUT 1
ASI OUT 2
Pin-outs Centre
Shield
Ground/Chassis
Audio Outputs
A pair of 9-way male D-type connectors provide
two stereo channels. Each connector carries a
single channel of a stereo pair in both analogue
and digital form. The output can be varied
according to service and unit configuration.
Audio control is through the Service Menu
(#3). The specification for this connector is
given in Section B.5.2, Audio Outputs.
AUDIO 1 / 2