TANDBERG TT1260 - Manual (Page 144)

Factory Defaults
Page F-2 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
Menu Page Description Default
3.2.3 ROUTING STEREO
3.2.4 CLIPPING LEVEL 18dB
3.2.5 AC3 DOWNMIX METHOD SURROUND STEREO
3.4 ASYNC DATA (High Speed RS-422 Data Enabler
Card Not Fitted) ENABLED
3.4 SYNC DATA (High Speed RS-422 Data Enabler
Card Fitted) ENABLED
3.5 TELETEXT ENABLED
3.6.1 VPS ENABLED
3.6.2 WSS ENABLED
3.6.3 VITC INSERTION ENABLED
3.6.4 VITC 525 LINE 14 and 16
3.6.4 VITC 625 LINE 19 and 21
3.6.5 VIDEO INDEX ENABLED
3.6.6 AMOL 1and2 ENABLED
3.6.7 CLOSED CAPTION ENABLED
3.6.8 ITS INSERTION (CCIR) ENABLED
3.7 PCR PID
#4 Conditional
Access 4.1 RAS DSNG MODE
4.1 RAS KEY UNAFFECTED
4.2 SIGNAL PROTECTION DISABLED
4.3.1 DIRECTOR UNAFFECTED
4.4 BISS MODE 1
4.4 BISS KEY UNAFFECTED
4.5 PROVIDER LOCK UNAFFECTED
4.6 TS OUTPUT ENCRYPTED
#5 Alarm 5.2 IF NO TRANSPORT STREAM NO ALARM
5.3 IF VIDEO NOT RUNNING NO ALARM
5.4 IF AUDIO 1 NOT RUNNING NO ALARM
5.5 IF AUDIO 2 NOT RUNNING NO ALARM
#6 Setup 6.1 OPERATING MODE FRONT PANEL
6.1.1 LCD CONTRAST MEDIUM
6.1.2 SERIAL REMOTE CONTROL RS 232 TTV
6.1.3 IP ADDRESS 155.155.155.201
6.1.4 SUBNET MASK 255.255.255.000
6.1.6 SERVICE HUNT MODE ENABLED
6.1.7 CUSTOMISATION KEY UNAFFECTED
6.2 SW VERSION/ FW VERSION/ HW VERSION/
PLD VERSION/ ELECTRONIC SERIAL NUMBER UNAFFECTED