Tascam HS-8 - Manual (Page 16)

16
TASCAM HS-8
Home Screen during recording
Home Screen REC/MON page
Home Screen NEXT TAKE NAME page
Home Screen PAN/LEVEL page
Home Screen INFO page
t Recording media display (button)
This shows which of the two CF card slots is being
used, as well as its remaining recording time. The
background of the media that is currently being
used appears green during playback and red when
recording.
If there is no media in the slot,
No Media
is shown and
the background is light grey. If the card has no projects
or folders, a
NoProject
message appears. When an
unformatted CF card is inserted in the CF card slot that
is not being used,
UNFORMAT
appears. When a CF card
is inserted during recording,
UNMOUNT
appears. When
recording is stopped, the usual screen is shown.
If the total number of entries, including files and
subfolders, inside a folder exceeds about 5000,
recording becomes impossible and “Rec Limit”
is shown. For details, see “Recording operation
limitations” on page 29.
Press this part of the screen to open the
CF SELECT
screen (media selection screen). (See “CF card
selection” on page 23.)
y REC/MON button
Touch this button to open the
REC/MON
page where
you can make record function and input monitoring
settings.
<Record arm button>
Touch this to arm a track for recording. When a track
is armed, the track signal will be recorded during
recording.
When a channel is armed for recording, the signal from
the assigned input connector is input when the unit is
stopped, recording or in recording standby.
<Input monitoring button>
Touch this to enable/disable input monitoring.
When enabled for a channel, sound input through the
assigned input connector is always input.
u NEXT TAKE NAME button
Touch this button to open the “
NEXT TAKE NAME
” page
where you can set the name that will be given to takes
recorded in the future.
• First half of take names
The first half of the take name can be set to either the
“User Word” or the “Folder Name”. (Default setting:
Folder Name)
NOTE
The first half of the take name can only be changed when the unit is
stopped.
2 − Names and functions of parts