Tascam HS-8 - Manual (Page 27)

TASCAM HS-8
27
Connecting headphones
Connect headphones to the PHONES connector on
the front panel. Keep the headphones knob turned
to MIN (all the way to the left) when connecting
headphones.
Headphones
CAUTION
Before connecting headphones, turn the PHONES knob to the
minimum volume. Failure to do so could cause sudden loud noises
to occur, which might damage your hearing or equipment.
Setting the inputs
1 Press the MENU key on the front panel to open the
MENU
screen.
2 Touch the
MIXER SETUP
button to open the
MIXER
SETUP
screen.
On the
INPUT
page, make settings for each
channel’s input source. For details, see “INPUT
page” on page 49.
3 If necessary, open the
DIGITAL SOURCE
,
SETUP
and
OUTPUT
pages to make additional settings.
For details about the
DIGITAL SOURCE
page, see
“DIGITAL SOURCE page” on page 49.
On the
SETUP
page, you can edit channel names and
turn channel links ON and OFF. To edit channel names,
touch the buttons next to the
CH NAME
item. For details,
see “CHx NAME (button)” on page 50.
Make output settings on the “OUTPUT” page. For
details, see “OUTPUT page” on page 49.
Input settings can also be changed on the
CHx SETUP
screens (“
x
” is the channel). These screens can be
opened in two ways.
Touch a • CHANNEL SETUP
button on the
MENU
screen.
Touch a • CHANNEL
button at the top of the
MIXER
SETUP
screen.
4 − Recording and Playback