Tascam HS-8 - Manual (Page 36)

36
TASCAM HS-8
Caps button: Use to input uppercase letters.
Space button: Use to input a space.
<– / –> buttons: Use these to move the cursor.
Enter button: Touch this to confirm the input name.
NOTE
When the “PROJECT NAME” screen is open, you can also use an
external keyboard that is connected to the KEYBOARD connector on
the front panel to input names.
2 Touch the
Enter
button on the
PROJECT NAME
screen
or press the DATA dial to confirm the project name.
Character input limitation
The maximum number of characters allowed is indicated
by the yellow background in the project name display
area. Excess characters have a grey background and are
discarded when the
Enter
button is pressed.
Changing a project name later
1 Select the project that you want to change on the
PROJECT
screen.
The background of the selected project name appears
yellow.
2 Touch the
MENU
button to open a pop-up menu.
3 Touch the
EDIT NAME
button in the pop-up menu to
open the
PROJECT NAME
screen.
NOTE
When multiple projects are selected, the “EDIT NAME” button in the
pop-up menu is not available.
4 Input the project name using the procedures
described above.
5 Touch the
Enter
button on the
PROJECT NAME
screen
or press the DATA dial to confirm the project name
and return to the
PROJECT
screen.
Editing the name of the first folder
Touch the
Folder Name
button on the
CREATE
PROJECT
screen to open the
1st Folder
screen, as
shown below.
Follow the same procedures as in “Editing the project
name” on page 35 to change the scene name.
NOTE
The folder name cannot be changed later.
Loading projects
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Select the project that you want to load.
3 Touch the
MENU
button to open a pop-up menu.
4 Touch the
LOAD
button in the pop-up menu.
NOTE
When multiple projects are selected, the “LOAD” item is not
available.
5 Touch the
OK
button or press the DATA dial when
the confirmation pop-up message appears.
After loading completes the Home Screen opens.
NOTE
When a project is loaded, the last loaded folder is also loaded. The
highest numbered take in that folder is also loaded.
5 – Projects