Tascam HS-8 - Manual (Page 19)

TASCAM HS-8
19
3 − Preparation
Inserting and removing CF cards
Inserting CF cards
Insert a CF card into CF card SLOT 1 or SLOT 2 on the
front panel of the unit in order to use it for recording and
playback.
NOTE
CF cards can be inserted whether the power is ON or OFF.
1 Open the CF card slot cover.
2 Insert the CF card with the correct orientation.
With the labeled side up, insert the end with the
connector completely.
3 Close the cover.
NOTE
If you cannot close the slot cover, remove the CF card once, press the
square button to the right of the slot in and then reinsert the card.
Removing CF cards
Turn the unit power OFF or stop operations before
removing a CF card.
CAUTION
Never remove a CF card during recording, playback, or anything
else that accesses the CF card. Doing so could, for example, cause
recording errors, loss of recorded data, and sudden loud noises to
be output through monitoring equipment, which could result in
damaged equipment and hearing loss.
1 Pull the CF card slot cover forward.
2 Press the square button to the right of the CF card
slot to bring the button out.
3 Press the square button in again to partially eject
the CF card.
4 Pull the CF card out by hand.
Security screws
The included security screws can be used to lock the CF
card slot covers. Use a Phillips head screwdriver to install
or remove the screws.