1 − introduction, Features, Included items – Tascam HS-8 User Manual

Page 6: Conventions used in this manual, Intellectual property rights

Advertising
background image

6

TASCAM HS-8

Thank you very much for purchasing a TASCAM HS-8

8 Channel Audio Recorder. Please read this manual

thoroughly before using the unit so that you understand

correct operating procedures and can use its functions

fully. We hope that you enjoy using this unit for many

years.
Please keep this manual so that you can read it at

any time. A digital copy of this manual can also be

downloaded from our website (http://www.tascam.com/)

Features

CF cards used as recording media (Ultra DMA

compatible)
Simultaneous recording of 8-channel multitrack and

stereo mix at 44.1/48 kHz, 16/24 bit
8-channel multitrack recording at 88.2/96 kHz, 16/24

bit
4-channel multitrack recording at 176.4/192 kHz, 16/24

bit
Broadcast Wave Format (BWF) files

Flash start possible using optional RC-HS20PD

JOG/SHUTTLE functions

Intuitive operation using graphical interface on TFT

color touch-screen
8 balanced analog inputs and outputs on 25-pin D-sub

connectors
8 AES/EBU digital inputs and outputs on a 25-pin D-sub

connector
8-channel ADAT digital input and output

2 channels of balanced XLR analog input and output

XLR AES/EBU digital input and output

Headphones output

BNC time code input and output

BNC video reference, as well as word clock input and

output/thru
USB storage media can be connected and files copied

(support planned in a version upgrade)
LAN (Ethernet) functions allow file transfer, remote

control and monitoring over a network (support

planned in a version upgrade)
Cascade function allows multiple units to be operated

in sync (support planned in a version upgrade)
Can be used with parallel remote control

Can be used with RS-232C serial remote control

Can be used with RS-422 (9-pin serial protocol

standard) serial remote control

Included items

This product includes the following items.

Take care when opening the package not to damage the

items. Keep the package materials for transportation in

the future.
Please contact the store where you purchased this unit

if any of these items are missing or have been damaged

during transportation.

Main unit (HS-8)

........................................................................... 1

Power cord set

............................................................................. 1

Rack-mounting screw kit

......................................................... 1

Security screws

............................................................................ 3

Warranty card

............................................................................... 1

Owner's manual (this manual)

............................................... 1

Conventions used in this manual

In this manual, we use the following conventions:

Keys, jacks and other parts on the main unit and

external devices are indicated like this:

MENU

Messages on the unit’s display are shown like this:

ON

“CompactFlash card” is abbreviated as “CF card.”

Additional information is provided as necessary as tips,

notes and cautions.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special cases.

CAUTION

Failure to follow these instructions could result in injury, damage to
equipment or lost recording data, for example.

Intellectual property rights

TASCAM is a trademark of TEAC Corporation, registered

in the U.S. and other countries.
CompactFlash is a US registered trademark of SanDisk

Corporation.
Other company names, product names and logos

in this document are the trademarks or registered

trademarks of their respective owners.

Any data, including, but not limited to information,

described herein are intended only as illustrations

of such data and/or information and not as the

specifications for such data and/or information. TEAC

Corporation disclaims any warranty that any use

of such data and/or information shall be free from

infringement of any third party’s intellectual property

rights or other proprietary rights, and further, assumes

no liability of whatsoever nature in the event of any

such infringement, or arising from or connected with

or related to the use of such data and/or information.

1 − Introduction

Advertising