Tascam HS-8 - Manual (Page 57)

TASCAM HS-8
57
FRAME EDIT ON
FRAME EDIT OFF
3 Touch a number button to edit a mark. Use the
DATA dial to change the time for the selected
number.
Press the
ENTER
button to confirm the setting and
return to the
MARK LIST
screen.
Touch the
CLEAR
button to reset the input value.
TIP
You can use a PS/2 keyboard to set these values. Press the Enter key
to confirm and press the ESC key to reset the input value.
Renumbering marks
1 Touch the
RENUMBER
button on the
MARK LIST
screen
to open the following confirmation message.
2 Press the
OK
button or the DATA dial to renumber
the marks.
Manual locate function
You can directly input a time and locate to it. Touch the
Manual Locate
button on the Home Screen to open the
MANUAL LOCATE
screen. Touch the
FRAME EDIT
button to
set whether or not the frame value can be edited.
FRAME EDIT ON
FRAME EDIT OFF
There are three locate modes.
ABS: Input an actual time and locate to it.
+: Input an amount of time to go forward from the current
time and locate to the new time.
–: Input an amount of time to go back from the current
time and locate to the new time.
Input the time using the number buttons. You can also
select a number field and use the DATA dial to adjust the
time.
Press the
LOCATE
button to locate to the new time and
return to the Home Screen.
Touch the
CLEAR
button to clear all input values.
TIP
You can use a PS/2 keyboard to set these values. Press the enter key
on the PS/2 keyboard to confirm or press the ESC key button to clear
all input values.
7 – Mark and Locate Functions