Tascam HS-8 - Manual (Page 49)

TASCAM HS-8
49
Mixer settings (MIXER SETUP)
Make mixer settings on this screen.
The
MIXER SETUP
screen has 4 pages:
INPUT
,
DIGITAL
SOURCE
,
SETUP
and
OUTPUT
. Touch the tabs at the bottom
of the screen to open the corresponding page.
INPUT page
Make input settings on this page.
CHANNEL buttons
Press a channel button to open the corresponding
CHx
SETUP
screen (“
x
” is the channel).
INPUT SOURCE
Set the input source for each channel
Ana 1-8: 25-pin D-sub analog input (default setting) •
Ana A-B: XLR analog input •
AES 1-8: 25-pin D-sub AES/EBU input •
AES A-B: XLR AES/EBU input •
ADAT 1-8: ADAT input •
DIGITAL SOURCE page
Set the digital input sources.
CHANNEL buttons
Press a channel button to open the corresponding
CHx
SETUP
screen (“
x
” is the channel).
DIGITAL SOURCE
Set the digital input source for each pair of channels.
AES x-x (default setting): 25-pin D-sub AES/EBU input •
AES A-B: XLR AES/EBU input •
ADAT x-x: ADAT input •
Fs CONVERT buttons
Turn the sampling rate converter ON or OFF for each pair
of inputs (default setting: all
OFF
).
SETUP page
Access the channel name editing screen and turn channel
links ON and OFF on this page.
CHANNEL buttons
Press a channel button to open the corresponding
CHx
SETUP
screen (“
x
” is the channel).
CH NAME
Touch these buttons to edit the name of the
corresponding channel.
CH Link
Touch these buttons to turn channel links ON and OFF.
(Default settings: all
OFF
)
The following parameters are shared by link channels.
2Mix LVL knob •
Solo •
Record arming •
Input source •
PAN pot (becomes balance) •
Input monitor •
OUTPUT page
Make settings related to output on this page.
XLR Output Source
Set the source to be output from the
ANALOG OUTPUT L/
R and DIGITAL OUTPUT L/R connectors.
L/R button (default value): Stereo mix
6 – Internal Settings and Operations