Tascam HS-8 - Manual (Page 59)

TASCAM HS-8
59
Enabling online functions
In order to use online functions, in the online function
setting must be enabled.
1 Press the MENU key on the front panel to open the
MENU
screen.
2 Touch the “SYSTEM SETUP” button to open the
“SYSTEM SETUP” screen.
3 Touch the
Enable
button of the
ONLINE Function
item to change the online function setting (default
value:
Disable
).
Activating online playback mode
When the online function is enabled, the online playback
mode can be activated by one of the following operations.
ONLINE event from connected parallel control •
ONLINE command from connected RS-232C serial •
control
ON LINE key pressed on connected RC-HS20PD remote
•
controller designed for use with this unit
When online playback mode is activated, the Home
Screen opens automatically, and the icon on the
screen appears red. When online playback mode is not
activated, the icon appears unlit on the screen.
Relationship between the online playback mode and
sound output is as follows.
On line playback mode Off On
Analog output (1-8) ˆ ¨
Digital output (1-8, AES/EBU) ˆ ¨
Digital output (1-8, ADAT) ˆ ¨
Analog output (L/A, R/B) ¨ * ¨ **
Digital output (L/R) ¨ * ¨ **
Headphones ¨ *** ¨ ***
RC-HS20PD (Headhones, speaker) ¨ *** ¨ ***
* If “XLR Output Source” is set to “MONITOR”, the
monitoring mix is output.
** The signal output is according to the “XLR Output
Source” setting.
*** The monitoring mix is always output.
Moreover, when online playback mode is activated, the
buttons operate as follows.
Playback status Pause status
ONLINE ON/OFF ˆ ¨
Play ˆ ˆ
Fader Play ˆ ¨
Stop ¨ * ¨
Fader Stop ¨ * ¨
FLASH ¨ ** ¨ ***
PAUSE ˆ –––
Track Skip ˆ ˆ
Mark Skip ˆ ˆ
CALL ˆ ˆ
Search ˆ ˆ
JOG ˆ ˆ
SHUTTLE ˆ ˆ
FLASH LOAD ˆ ˆ
MARK ˆ ˆ
MENU operation ˆ ˆ
PROJECT operation ˆ ˆ
Mark List ˆ ˆ
Manual locate ˆ ˆ
* If incremental play is set to ON, when you press the
stop key or lower the fader to stop playback, the unit
pauses at the beginning of the next track (Online
Ready).
** If you press a FLASH key to play a loaded take, the
take is changed to the corresponding one and flash
playback occurs. (If the take is not loaded, ordinary
playback begins.)
*** If you press a FLASH key when the unit is paused
and the fader is lowered (Fader Stop) the take is
changed and the unit stays paused. Otherwise, the
take changes and begins playing immediately (flash
playback).
NOTE
When the “ONLINE Function” item is set to “Disable” (the online
function is OFF), sound is output from all connectors.
9 – Online functions