Tektronix MTM400 - Manual (Page 37)

Operating Basics
MTM400 MPEG Transport Stream Monitor User Manual 2-3
Remote User Interface
The Remote User Interface (RUI) allows you to configure and monitor the
MTM400. The RUI can be run on any personal computer (client PC) that meets the
minimum specifications (refer to MTM400 MPEG Transport Stream Monitor
Technical Reference) and that has access to the MTM400 unit.
You can open the RUI of more than one RTM device by opening a new browser
window each time; however, this may place an excessive processing load on your
PC.
With the RUI accessed through your PC browser, three primary screens (or views)
are provided to enable monitoring and configuration of the MTM400: Hot Spot
View, Device View, and Stream View.
Figure 2-2: RUI overview
To close the Remote User Interface, close the original web browser window. All
associated windows will close.
Hot Spot view
Device view Stream view