Tektronix MTM400 - Manual (Page 94)

Stream View
3-46 MTM400 MPEG Transport Stream Monitor User Manual
Editing a PID Group.
To add or remove a PID from a PID Group, select PIDs… from
the PID Group title bar.
Delete removes the PID highlighted in the PIDs: field.
The PID is removed from the PIDs: field.
Add adds the PID identified in the New PID: field to the PID Group.
The PID is added to the PIDs: field.
Change Bar
The variation of bit rate in each PID is indicated by a Change Bar. The ends of the
Change Bar show the maximum and minimum values of the bit rate since
monitoring started or since the change bars were last reset.
The Change Bar on all PID Groups can be reset by selecting the
Reset Change Bars button at the top of the PID Groups screen.
Change Bar