Tektronix MTM400 - Manual (Page 79)

Stream View
MTM400 MPEG Transport Stream Monitor User Manual 3-31
The view contains the following elements (more detailed descriptions follow):
Title Bar The title bar of the screen displays the name of the stream
under test (assigned on the Configuration Screen
(see page 3-76).
Transport Stream: The transport stream identity.
Packet Size: The transport stream packet size.
Stream Bit Rate: The total bit rate of the stream.
Hex Display If enabled, the Transport Stream ID and the program ID are
displayed in hex format. If disabled, they are displayed in
decimal format.
Table:
Program ID (ID) : The program number.
Program Occupancy Status (State):*
Indicates the Program Occupancy test error state for the
program.
Program Bit Rate (Multiplex Occupancy):*
A graphical representation of the program bit rate. The bar
color indicates the error status of the program bit rate.
Superimposed on the bar are the Change Bar and (where set)
the limits (see Clear Limits below).
Program Bit Rate (Bit Rate) :
The program bit rate in bits per second.
PMT Test: Shows the PMT Test result (see page 3-33).
Buttons:
Reset Change Bars *
Resets the Change Bars of all programs.
Reset Prog Occ Event *
Resets the proprietary Program Occupancy test normal state
(no error).
Clear Limits * Resets and disables the Bit Rate Limits of all programs.
* - only displayed if Bit Rate Testing (Option 05) is licensed for use.