Tektronix MTM400 User Manual
Page 59
Advertising
Device View
MTM400 MPEG Transport Stream Monitor User Manual
3-11
Firmware Upload
If new device or interface card firmware is available, this function allows you to
upload it to the respective device. The firmware filename format is *.hex.
Device Firmware Upload.
CAUTION. The Device Log must be cleared immediately before uploading the
firmware.
1.
Clear the Device Log.
2.
Select Upload Device Firmware.
3.
Identify the firmware file either by entering the path and filename or by using
Browse.
4.
Select Start to upload the firmware.
CAUTION. If the instrument contains a CIP interface card (COFDM, QAMB2,
8PSK,8VSB), the upload process can take up to 15 minutes to complete. The
operation will fail if power is removed during this process.
Advertising