TC electronic SDN BHD M3000 - Manual (Page 16)

THE REVERB WIZARD
Press SHIFT and WIZARD to enter the Wizard function.
Use the CURSOR keys to select the different filters
and the ADJUST wheel to select filter parameters.
Set the three different categories as you desire and try out the
proposed presets. The Reverb Wizard will show the name and
number of the proposed preset.
Scroll through the presets using the ADJUST wheel and press OK to
recall.
At first you might think of this feature as “too easy” or a feature for
users less than professionals. Please don’t! If the presets suggested by
the Wizard are not the perfect choices in your opinion, they will at
least give you a very good starting point.
The Reverb Wizard is a unique guide that helps you
find the optimal factory preset for your program materi-
al. By selecting an algorithm and the instrument type
you wish to apply the reverb to, the Reverb Wizard
suggests a selection of relevant presets.
The Wizard is easy to access and simple to use.
Try the Wizard and listen what presets our creative
staff suggests for your specific application.
Select between Music or Post
production application
Engine 1 or 2 or 1+2
Select instrument or environment
Select the size of the reverb
Dial to select between the
presets that utilize the search
criteria. And press OK to recall
Name of the selected preset
Number of presets
utilizing the search
criteria
The Wizard Display
Press SHIFT and WIZARD to enter The Reverb Wizard.
14