TC electronic SDN BHD M3000 - Manual (Page 8)

66
THE FRONT PANEL
SETUP SECTION
I/O
Input/Output.
Sample Rate.
Select Status bit Output.
Dithering.
ROUTING
Setup the internal routing
of the 2 Engines.
LEVELS
Input/Output Analog levels.
Digital/Input level.
UTIL/MIDI
Adjust the viewing angle of the display
for better comfort.
Security lock.
Glide Time setting.
Card handling.
Pedal Input.
MIDI.
SECONDARY FUNCTIONS
Help
(online help function)
MIDI Monitor
(Monitors all MIDI ch. at the same time)
POWER + MEMORY CARD
POWER SWITCH
Turn on the machine with a
single light touch. To turn off
the machine you must press
and hold down the POWER
key approx. 3 seconds, until
the display reads M3000.
This delay time is to avoid
switching off the device by
accident.
PCMCIA-CARD
Copy presets to/from a
standard memory card.
CARD TYPES
S-RAM type 1 PCMCIA
cards, with a minimum of
64KB and a maximum of
2MB memory.
PPM + INDICATORS
PPM METERS
Ranging from -40dB to 0dB.
OVERLOAD
Indicates if internal overload
occurs.
SAMPLE RATE INDICATOR
48000Hz
44100Hz
32000Hz
MIDI IN
MIDI receive indicator.
CARD
Indicates presence of a valid
memory card.
TEMPO
Beats per minute indicator.
MORPHING
Indicates on-going morphing
between the two Engines.