True Manufacturing Company TD-50-18-S-LT - Manual (Page 19)

............ www.truemfg.com ............
True Food Service Equipment, Inc.
17 17
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
T M
C TRUE
REQUIRED TOOLS
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
STEP 1
Disconnect power to unit.
STEP 2
Take off lower grill assembly by removing all screws.
STEP 3
Remove bolts anchoring compressor assembly to frame
rails and carefully slide out. (tube connections are
flexible)
STEP 4
Clean off accumulated dirt from condensing coil with a
stiff bristle brush.
STEP 5
Lift cardboard cover above fan at plastic plugs and
carefully clean condenser coil and fan blades.
STEP 6
After brushing condenser coil vacuum dirt from coil, and
interior floor.
STEP 7
Replace cardboard cover. Carefully slide compressor
assembly back into position and replace bolts.
STEP 8
Reinstall louver assembly onto unit with appropriate
fasteners and clips. Tighten all screws.
STEP 9
Connect unit to power and check to see if condenser is
running.