True Manufacturing Company TD-50-18-S-LT - Manual (Page 23)

............ www.truemfg.com ............
INSTALLATION / OPERATION INSTRUCTIONS
Be careful when removing the light bulb. Please
be aware of your local ordinances in disposing
old florescent bulbs. These bulbs should be dis-
posed in a safe and correct manner.
WARNING
When replacing a light bulb make sure power to
the unit is either turned off
or unplugged.
LIGHT BULB REPLACEMENT (IDL)
INTEGRATED DOOR LIGHTING
Remove the lampshield to reveal
the bulb. Squeeze the sides of the
lampshield at the same time pull-
ing it away from the bulb.
The lamp holders are spring acti-
vated. Pull the top lamp holder
up and push the bulb down at the
same time. This will leave enough
clearance to remove the bulb.
True Food Service Equipment, Inc.
21 21