Toshiba G7 User Manual
Page 81
Advertising
G7 ASD Multi-Protocol Communication Option and PG Feedback Option Manual
74
Settings "4" through “18”: Command the drive to run preset speeds #1..#15. Preset speeds can be set
via ASD parameters F018..F024 and F287..F294. Note that the drive will not react to the preset speed
commands unless it is operating from the network command source at the time of the watchdog timeout.
Also note that the drive’s RUN/STOP command is not modified when these settings are selected.
Therefore, the drive will not actually run the preset speed if it was not already being issued a RUN
command at the time of the watchdog timeout.
Advertising