Tascam 788 - Manual (Page 109)

12 – MMC and MIDI functions–Control Change messages
TASCAM 788 Digital PortaStudio
109
Reverb and Gate
NRPN values for distortion multi-effect processor settings (1)
Compressor->Distortion->Noise Gate->Flanger->Reverb
NRPN Parameter Range
00 00 Type 0, 1 = Normal, Reverse
00 01 Threshold 0 through 30 = -46 through -16 dB
00 02 Gate Time 0 through 300 = 10 through 3000msec
00 03 Density 0 through 100
00 04 Out Level 0 through 100 through 127 = – ∞ through 0 through +6 dB
NRPN Parameter Range
00 00 Comp:Compress 0 through 100
00 01 Comp:Attack 0 through 100
00 02 Comp:Post Gain 0 through 30 = 0 through 30 dB
00 03 Comp:Switch 0, 1 = Off, On
00 04 Dist:Pre Gain 0 through 20 = 40 through 60 dB
00 05 Dist:Drive 0 through 100
00 06 Dist:Out Level 0 through 12 = 0 through 12 dB
00 07 Dist:Switch 0, 1 = Off, On
00 08 Gate:Threshold 0 through 60 = -76 through -16 dB
00 09 Gate:Release 0 through 100
00 10 Gate:Suppress 0, 1 through 31 = – ∞ ,-30 through 0 dB
00 11 Gate:Switch 0, 1 = Off, On
00 12 Flanger:Rate 0 through 100 = 0.0 through 10.0Hz
00 13 Flanger:Depth 0 through 100
00 14 Flanger:Feedback 0 through 100
00 15 Flanger:Switch 0, 1 = Off, On
00 16 Reverb:Pre Delay 0 through 150 = 0 through 150msec
00 17 Reverb:Hi Damp 0 through 10
00 18 Reverb:Mix Level 0 through 100
00 19 Reverb:Switch 0, 1 = Off, On