Tascam 788 - Manual (Page 118)

12 – MMC and MIDI functions–Control Change messages
118
TASCAM 788 Digital PortaStudio
Compressor->Noise Gate->De-esser->Chorus->Delay
NRPN values for multi-effect processor (3)
Compressor->Noise Gate->Exciter
NRPN Parameter Range
00 00 Comp:Compress 0 through 100
00 01 Comp:Attack 0 through 100
00 02 Comp:Post Gain 0 through 30 = 0 through 30 dB
00 03 Comp:Switch 0, 1 = Off, On
00 04 Gate:Threshold 0 through 60 = -76 through -16 dB
00 05 Gate:Release 0 through 100
00 06 Gate:Suppress 0, 1 through 31 = – ∞ ,-30 through 0 dB
00 07 Gate:Switch 0, 1 = Off, On
00 08 De-esser:Frequency 0 through 90 = 1.0 through 10.0kHz
00 09 De-esser:Depth 0 through 60
00 10 (reserved)
00 11 De-esser:Switch 0, 1 = Off, On
00 12 Chorus:Rate 0 through 99 = 0.1 through 10.0Hz
00 13 Chorus:Depth 0 through 100
00 14 Chorus:Mix Level 0 through 100
00 15 Chorus:Switch 0, 1 = Off, On
00 16 Delay:FB delay 0 through 1000 = 0 through 1000msec
00 17 Delay:Feedback 0 through 100
00 18 Delay:Mix Level 0 through 100
00 19 Delay:Switch 0, 1 = Off, On
NRPN Parameter Range
00 00 Comp:Compress 0 through 100
00 01 Comp:Attack 0 through 100
00 02 Comp:Post Gain 0 through 30 = 0 through 30 dB
00 03 Comp:Switch 0, 1 = Off, On
00 04 Gate:Threshold 0 through 60 = -76 through -16 dB
00 05 Gate:Release 0 through 100
00 06 Gate:Suppress 0, 1 through 31 = –
∞
,-30 through 0 dB
00 07 Gate:Switch 0, 1 = Off, On
00 08 Exciter:Frequency 0 through 90 = 1.0 through 10.0kHz
00 09 Exciter:Depth 0 through 100
00 10 (reserved)
00 11 Exciter:Switch 0, 1 = Off, On