About the menus, Selecting multiple entries, The menu key – Tascam 788 User Manual

Page 24: Selecting multiple entries the menu key, 2 – getting started–about the menus

Advertising

2 – Getting started–About the menus

TASCAM 788 Digital PortaStudio

About the menus

The 788 uses a menu interface to display and select
operations that you cannot carry out using the front
panel keys.

The

JOG/DATA

dial is often used to scroll through a

list. When the dial can be used, the screen will usu-
ally show a small icon representing the dial (as
shown at on the left of the screen).

Generally, the transport must be stopped (not playing
back or recording) when using the menus.

When scrolling through a list, when the option you
want is highlighted, you should select the option by
pressing the

ENTER/YES

key.

The

EXIT/NO

key allows you to move up a level

without selecting an option.

Selecting multiple entries

Sometimes multiple entries can be selected from a
list (for instance, when copying songs). In this case,
the selected entries in the list are shown by a check
mark (

✔) beside the list entry.

To set a check mark by a list entry, press the

INSERT/

MOVE

key.

To clear a check mark from a list entry, press the

DELETE/SILENCE

key.

The MENU key

The

MENU

key allows you to make settings with the

“system” menus.

These menus provide access to system-level settings
that you will probably not use very often (for
instance, you will only create a song once in the life-
time of a song).

SONG

menus

(see “The SONG menu” on
page 28

CREATE
SAVE
REVERT
LOAD
ERASE
COPY
DELETE UNUSED
PROTECT

DISK

menus

(see “DISK menu” on page 31)

SELECT
EJECT
FORMAT
CHECK

CD-R

menus

(see the section “Mastering
and backup (CD-R)” on
page 72)

PRE MASTERING
CHECK MASTER
CD WRITER
CD FINALIZE
CD PLAYER
DATA BACKUP
DATA RESTORE