Hom satellite option menu, C.5.5, C.5.5 hom satellite option menu – TANDBERG High Definition Professional Recevier/Decoder TT1280 User Manual

Page 123

Advertising
background image

Menus

Reference Guide: TT128x High Definition Professional Receiver/Decoder

Page C-7

ST.RE.E10141.5

C.5.5 HOM

Satellite

Option

Menu

When a Higher Order Modulation Input interface is used, the Input menu

allows the user to edit the HOM parameters.

Table C.7: HOM Satellite Menu

Display Title: Input

Description

Quality

PV BER -1 -3 -5
XX.LX E-8 XXXXXXXXXXXXXX
XXXXXXXX

XXXXXXXXXXXXXXX is a bar-graph indicating the current level
(10 x

–1

to

–5

range)

Eb/N0
XXX.X dB

XXX.X is a measure of the signal to noise ratio (first X is + or -)

Select Source

Select Source X

X is the EDITABLE input source selection 1, 2, 3 or 4

Source 1

LNB Frequency
XXXXX.X MHz

Sets the LNB frequency for Source 1. XXXXX.X is the LNB frequency in MHz

Satellite Frequency
XXXXX.X MHz

Sets the Satellite frequency for Source 1. XXXXX.X is the Satellite frequency in MHz.

Symbol rate
XX.XXXXXX Msymb/s

Sets the symbol rate for Source 1. XX.XXXXXX is the symbol rate in Msymb/s

Modulation FEC
XXXX XXXX

XXXX sets the modulation type (QPSK) and XXXX the FEC (1/2, 2/3, ¾, 5/6, 7/8) for
Source 1. The FEC selection is limited to the valid values of the currently selected
modulation type. For AUTO FEC, the Receiver searches for and locks to the correct
FEC rate for the received carrier.

Input Gain
XXXX

Sets the input gain of the HOM card.
Where XXXX is either LOW or HIGH

Roll Off
XXX

Roll off of the input.
Where XXX is either 20% or 35%

Spectrum Sense
XXXXXX

Spectrum sense of the incoming signal.
Where XXXXXX is either NORMAL or INVERTED.

LNB Power XXXXXXX
At YYY

XXXXXXX sets the LNB power for Source 1 (ON, OFF, BOOSTED) BOOSTED
provides 1V extra power over the ON setting.
YYY selects the rating of the power output (18v – Horiz, 13v – Vert)

LNB 22 kHz
XXXXXXXX

XXXXXXXX enables or disables LNB 22 kHz control tone for Source 1. (On, Off)

Search range
XXXXX kHz

Sets the centre frequency search range for Source 1. XXXXX is the search range in
kHz

Source 2

Same Sub-Menus as for Source 1

Source 3

Same Sub-Menus as for Source 1

Source 4

Same Sub-Menus as for Source 1

Advertising
This manual is related to the following products: