Audio routing, Lip sync, Supported audio specifications – TANDBERG High Definition Professional Recevier/Decoder TT1280 User Manual

Page 98: B.3.3, B.3.4, B.3.5, B.3.3 audio routing, B.3.4 lip sync, B.3.5 supported audio specifications

Advertising
background image

Technical Specification

Page B-6

Reference Guide: TT128x High Definition Professional Receiver/Decoder

ST.RE.E10141.5

Table B.3: Analogue Audio Performance Specifications

Parameter Conditions

Limit

Gain

0 dBm input level

±1 dB

Frequency response

100 Hz - 15 kHz, 0 dBm input level

±0.2 dB

20 Hz - 20 kHz, 0 dBm input level

+0.5 dB, -1 dB

Cross talk

0 dB input level, 100 Hz

-80 dB

0 dB input level, 1 kHz

-70 dB

0 dB input level, 10 kHz

-60 dB

Distortion

+8 dBm input level, 100 Hz

-70 dB

+8 dBm input level, 6.3 kHz

-70 dB

Noise RMS

-65

dB

Phase

40 Hz to 15 kHz

±2°

Lip sync delay

Depends on synchroniser configuration

±5 ms

B.3.3 Audio

Routing

The IRD supports the following routing of audio signal:

STEREO (Channel 1 left, Channel 2 right)

MIXED TO BOTH (Channel 1 and 2 on left and right)

LEFT TO BOTH (Channel 1 on left and right)

RIGHT TO BOTH (Channel 2 on left and right)

When the input signal is STEREO, the Audio digital output format will

always be STEREO.
Where a dual mono service is available, it is possible to configure the

output as MIXED TO BOTH, LEFT TO BOTH and RIGHT TO BOTH.

B.3.4 Lip

Sync

The audio at the output remains synchronous to the decoded video by

default (i.e. where both video and audio streams are available from the

same service). In such circumstances the video and audio streams share

the same PCR.
The lip sync error (delay from presentation of video until presentation of

audio) introduced by the Receiver is in the range of ±5 ms.
The lip sync delay between stereo pair 1 and 2 is ±2 ms because the PTS

will be presented independently for each pair.
When using frame sync the lip sync error is up to 40 ms due to audio

frame skip and repeats.

B.3.5

Supported Audio Specifications

Table B.4: Supported Audio Specifications

Specification Description

ISO/IEC 13818-3

Generic Coding of Moving Pictures and Associated Information: (MPEG-2) Audio.

ATSC A-52

Digital Audio Compression Standard (Dolby Digital).

SMPTE 302M

Linear Audio (TANDBERG Television’s interpretation of the specification).

Advertising
This manual is related to the following products: