Entering the oac lockout pin, Returning the unit to local control mode, Entering the oac lockout pin -5 – TANDBERG High Definition Professional Recevier/Decoder TT1280 User Manual
Page 61: Returning the unit to local control mode -5, Table 4.4: entering the oac lockout pin -5, 2 returning the unit to local control mode
Operating the Equipment Remotely
Reference Guide: TT128x High Definition Professional Receiver/Decoder
Page 4-5
ST.RE.E10141.5
Entering the OAC Lockout PIN
Table 4.4: Entering the OAC Lockout PIN
Step Action
Result
1.
Go to menu #4.3.6 DIRECTOR.
Displays ‘NCP LOCK OVERRIDE PIN’.
2. Press
Edit.
Displays ‘ENTER CURRENT PIN’.
3.
Enter the four-digit PIN and press Save.
The unit is ready for local control.
4.2
Returning the Unit to Local Control Mode
Once the unit is in remote control mode, no local controls are available. To
reacquire local control, it is necessary to set the remote control parameter
back to Front Panel.
Table 4.5: Configuring the Unit for Local Control
Step Action
Result
1.
Go to menu 7.1.
Displays ‘OPERATING MODE’.
2. Press
Edit.
Displays ‘SERIAL REMOTE’ or ‘DIRECTOR NCP’.
3.
Press the down pushbutton and select
‘FRONT PANEL’ and press Save.
The unit is ready to be locally controlled.