TANDBERG High Definition Professional Recevier/Decoder TT1280 - Manual (Page 27)

Installing the Equipment
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 2-7
ST.RE.E10141.5
WARNINGS…
1. THE TT1280 AND TT1282 SHOULD ONLY BE OPERATED FROM THE TYPE OF POWER
SOURCE INDICATED ON THE MARKING LABEL. IF YOU ARE NOT SURE OF THE TYPE TO
YOUR BUSINESS, CONSULT YOUR APPLIANCE DEALER OR LOCAL POWER COMPANY.
DO NOT OVERLOAD WALL OUTLETS AND EXTENSION CORDS AS THIS CAN RESULT IN A
RISK OF FIRE OR ELECTRIC SHOCK.
2. THE TT1280 AND TT1282 RANGE OF RECEIVERS/DECODERS ARE NOT FITTED WITH AN
AC POWER ON/OFF SWITCH. ENSURE THE SUPPLY SOCKET OUTLET IS INSTALLED OR
LOCATED NEAR THE EQUIPMENT SO THAT IT IS ACCESSIBLE.
Figure 2.2: AC Power Inlet Assembly
NOTE...
See Annex B, Technical Specification for fuse information.
2.5.2 AC Power Supply Cord
General
A two-metre mains supply cord is supplied with this product. It is fitted
with a moulded plug suitable for the USA, UK or mainland Europe as
advised at the time of ordering.
NOTE...
The IRD is not fitted with an a.c. power supply ON/OFF switch. Ensure the socket-outlet supplying the
equipment is installed near the equipment so that it is easily accessible.
Wire Colours
The wires in the supply cord are coloured as shown in Table 2.1.
Table 2.1: Supply Cord Wiring Colours
UK (BS 1363) EUROPE (CEE 7/7) USA (NEMA 5-15P)
Earth: Green-and-yellow Green-and-yellow Green
Neutral: Blue Blue White
Live: Brown Brown Black
If the colours do not correspond with the coloured markings identifying the
terminals in a locally supplied plug, proceed as in Table 2.2. The inclusion
of Table 2.2 is for reference.
Position of the fuse carrier
Supply Inlet Mains