TANDBERG High Definition Professional Recevier/Decoder TT1280 - Manual (Page 4)

Preliminary Pages
Page iv Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
About This Reference Guide
This Reference Guide provides instructions and information for the
installation and operation of the TT1280 and TT1282 1U digital integrated
Receiver/Decoder (IRD).
This Reference Guide should be kept in a safe place for reference for the
life of the equipment. It is not intended that this Reference Guide will be
amended by the issue of individual pages. Any revision will be by a
complete reissue. Further copies of this Reference Guide can be ordered
from the address shown on page vii. If passing the equipment to a third
party, also pass the relevant documentation.
Issues of this manual are listed below:
Issue Date Software Version Comments
1 Oct 2003 1.0.0 Initial release.
2 Jan 2004 1.1.5 -48 V version added. IP Input card, RAS and RAS 2 added.
3 Feb 2004 2.0.0 TT1282 added. DTS, Closed Captions, RS-422 data, frame sync and
Ethernet HSD added.
4 May 2004 2.0.0 HOM option card added
5 Mar 2006 2.0.0 Inclusion of DVB-S2 information
The following documents are also associated with this equipment:
•
ST.US.E10141: User Guide
General
All best endeavours have been made to acknowledge registered
trademarks and trademarks used throughout this Reference Guide. Any
notified omissions will be rectified in the next issue of this Reference
Guide. Some trademarks may be registered in some jurisdictions but not
in others.
Registered trademarks and trademarks used are acknowledged below and
marked with their respective symbols. However, they are not marked
within the text of this Reference Guide.
Registered Trademarks
Ethernet ® is a registered trademark of Xerox Corporation.
VideoGuard ® is a registered trademark of NDS Limited.
Dolby Digital ® and AC-3 ® are registered trademarks of Dolby Laboratories
Licensing Corporation
.
Trademarks
Alteia ™ is a trademark of TANDBERG Television Limited.
Macrovision
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless authorized
by Macrovision. Reverse engineering or disassembly is prohibited.