TANDBERG High Definition Professional Recevier/Decoder TT1280 - Manual (Page 126)

Menus
Page C-10 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
Display Title: Video Description
GOP Structure Y…..Y
Pixel Aspect Ratio YYY Y…..Y video GOP structure and length
YYY is the current video aspect ratio (16:9)
Rate Buffer Level XXX%
Bit-rate YY.YY Mbit/s XXX is the current video rate buffer level fill percentage
YY.YY is the current video stream bit-rate
Fail mode YYYYYYYYYYYY YYYYYYYYYYYY is the editable parameter for setting the response to loss of
video (FREEZE FRAME, BLACK FRAME, NO SYNCS, BLUE FRAME,
75% BARS AND RED, BLUE PLUS TEXT, RED PLUS TEXT)
Test Pattern
XXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXX is the editable video test pattern to be
displayed:
NONE, 75% BARS AND RED, MOVING BAR, BORDER, 100% COLOUR BARS,
PATHOLOGICAL, MULTIBURST, MONITOR LINEUP, CONTRAST
Test Pattern Standard
XXXXXXXX XXXXXXXX is the editable standard for the test pattern:
AUTO, 1080i 30Hz, 1080i 29.97Hz, 1080i 25Hz, 1080i 24Hz, 1080i 23.976Hz,
720p 60Hz, 720p 59.94Hz, 720p 50Hz
Framesync XXXXXXX
YYYYYYYY XXXXXXX is the editable parameter for Framesync enable (ENABLED,
DISABLED)
YYYYYYYY shows the presence of a framesync input (SIGNAL NOT PRESENT,
SIGNAL PRESENT, FRAME RATE MISMATCH, SIGNAL LOCKED);
Framesync PAL Offset XXXXXX
Framesync NTSC Offset YYYYYY XXXXXX is the editable PAL framesync offset range –199999 to+199999 pixels
YYYYYY is the editable NTSC framesync offset range –199999 to +199999
pixels
4:2:0 Delay XX ms
4:2:2 Delay YY ms XX is the editable parameter for delaying 4:2:0 video frames (0 to 100 ms)
YY is the editable parameter for delaying 4:2:2 video frames (0 to 100 ms)
Output Mode YYY% YYY is the editable video output mode (RGB, YPbPr)
Trisync Mode Trisync on (NONE, ALL, GREEN)
Embedded Audio Data IDs XXX
Channel YYYY XXX is the editable embedded audio data IDs (0x0 – 0xFFF)
YYYY is the editable audio channel (NONE, ONE, TWO, ONE and TWO)