Ultratec PRO80 - Manual (Page 15)

CONNECTING POWER & PHONE LINE
1. If you are setting up a new Superprint Pro80 LVD for the first time, pull the
plastic tab out of the battery compartment and gently pull the printer guard out of
the printer compartment.
2. Plug the AC adapter into an electrical outlet.
3. Plug the AC adapter into the round jack on the back of the TTY. Leave the AC
adapter plugged in at all times.
4. Plug one end of the cord into one of the telephone jacks on the back of the TTY.
(The second jack may be used for a telephone or signaler).
5. Plug the other end of the telephone cord into a standard telephone wall outlet.
SETUP
CHAPTER
2
S E T U P • 9
Phone Line
Telephone or Signaler
Power
AC Adapter