Ultratec PRO80 - Manual (Page 19)

PLACING A CALL
CALLING & ANSWERING
CHAPTER
3
C A L L I N G & A N S W E R I N G • 1 3
Dial a Number that You Type
1. Make sure the Superprint Pro80 LVD is
on. The Power light should be lit.
2. Press the button. NAME OR
NUM> is displayed.
Dial
You have three options with the Dial button:
✔ Type the number of the person you are calling.
✔ Use a number that is stored in the Directory.
✔
Redial the last number that was dialed.
NAME OR NUM> _
Dial
DIALING...5551234
Enter
...Then
press
Type...
.. LINE IS RINGING ..
3. Type the number you are calling. Use
the
key to correct mistakes.
4. Press to dial the number.
DIALING... is displayed followed by
the telephone number.
Enter
Back Space
5. When the other TTY starts ringing,
the message LINE IS RINGING flashes
on the display.
If the other TTY is busy, LINE IS
BUSY is displayed. Try again later to
place the call or see “Automatically
Redial a Busy Number” on page 17.