Ultratec PRO80 - Manual (Page 41)

SAVING A NEW TELEPHONE NUMBER
1. Hold down and press .TYPE NAME OR ARROWS is displayed.
2. Type a new name and press . PHONE NUMBER> _ is displayed with a
blinking cursor where you can begin to type the number. A name can be up to 16
characters long including letters, spaces and numbers.
3. Type the number. There is room for up to 20 characters. You can insert dashes,
parentheses or spaces, but they are not required. You can also use the
corresponding letters from a standard telephone keypad. For example:
Some company publishes its phone number as: 1 (800) 555-HEAR
When dialed on a telephone, the number turns out to be: 1 (800) 555-4327
You can type the number either way on the Superprint Pro80 LVD.
You can use the following keys while typing or editing numbers: The
keys to move through the number without deleting. The key to
erase characters. The button to erase the entire number.
4. Press . DIR ENTRY SAVED is displayed.
5. Press to exit the Directory.
EDITING A NUMBER
1. Hold down and press .TYPE NAME OR ARROWS is displayed.
2. Type the name for the number you want to edit. If you do not remember what
name is used for the number, you can use the
keys to look through the list
of numbers in the Directory.
3. Press . The number is displayed. Enter
Directory Program
Esc
Enter
Clear
Back Space
Enter
Directory Program
USING THE DIRECTORY
CHAPTER
6
U S I N G T H E D I R E C T O R Y • 3 5
How many telephone numbers can I store in the Directory?
The Superprint Pro80 LVD will store 99 numbers. When saving numbers
remember that each entry must be given a unique name.