Ultratec PRO80 - Manual (Page 22)

Redial the Last Number
1. Make sure the Superprint Pro80 LVD is
on. The Power light should be lit.
2. Press the button. NAME OR
NUM> is displayed.
Dial
1 6 • C A L L I N G & A N S W E R I N G
How do I use the Emergency button?
See Chapter 4, “Advanced Calling,” on page 27 to learn how to use the
Emergency Dial button.
Program this button now so that you will be ready in an emergency (see
“Programming the Emergency Number” on page 27). Please note this button is
already programmed with 911.
NAME OR NUM> _
Dial
3. Press to dial the number.
REDIALING... is displayed followed
by the telephone number.
Enter
REDIALING...5551234
Enter
4. When the other TTY starts ringing, the message LINE IS RINGING flashes on
the display.
If the other TTY is busy, LINE IS BUSY flashes on the display. Try again later to
place the call or see “Automatically Redial a Busy Number” on page 17.
5. When the other person answers the call, his or her Greeting is displayed on your
TTY. Type a reply to continue your conversation.
6. When your conversation is over, press . The screen is blank.
You can also hold down the key and press the button. This will
hang up the call without turning off the Superprint Pro80 LVD.
Esc Ctrl
On/Off