Ultratec PRO80 - Manual (Page 37)

Placing a Call Using Relay Dial
1. Make sure the Superprint Pro80 LVD is on. The Power light should be lit.
2. Press the button. DIALING... is displayed followed by the number of the
TRS (Telecommunications Relay Service) that you have programmed for this
button.
3. When the Relay service TTY starts ringing, the Superprint Pro80 LVD Signal
light flashes slowly and LINE IS RINGING is displayed.
4. When the CA (Communications Assistant) answers the call, his or her Greeting is
displayed on your TTY. Type instructions for the CA such as the number and the
name of the person you wish to call. The CA will dial the number of the person
you are calling and type information such as whether the phone is ringing or busy.
5. When the person answers the phone, the CA will introduce the call and begin
typing everything that the other person says.
6. When the other person says GA, begin typing what you want to say. The CA will
read what you type to the person you are calling.
7. Continue your conversation.
3-WAY CALLING
Relay
A D VA N C E D C A L L I N G • 3 1
Use Baudot code for 3–way calling.
Whenever you use 3-way calling, be sure that all three TTYs are using
Baudot code (see “Code” on page 51). To change to Baudot, hold down the
and keys then press .
B Shift Ctrl
If your telephone service includes conference calling capabilities, the Superprint Pro80
LVD allows you to carry on a conversation with two other people.
1.
Call the first person you wish to talk to.
2. When the first person answers the call, ask him or her to hold.
3. Hold down the and keys then press . HOOK FLASH is displayed
briefly. Then, NAME OR NUM is displayed.
4. Type the phone number of the second person and press .
5. When the second person answers the call, ask him or her to hold while you
reconnect the first person.
6. Hold down the and keys then press . You now have a 3–way
calling conversation.
7. Take turns as you would during a two-person conversation.
F Shift Ctrl
Enter
F Shift Ctrl