Auto id, Dial using, Dialing prefix – Ultratec PRO80 User Manual

Page 61

Advertising
background image

Auto ID

The Auto ID feature alerts a hearing person that you are calling from a TTY. It
automatically sends a series of audible tones over the telephone line every few seconds.
This helps people like 911 operators quickly recognize a TTY call.

The tones are sent if someone picks up your call but no one begins typing. SENDING
AUTO ID is displayed each time the tones are sent. Tones are also sent if no one types for
a few minutes during a conversation. Auto ID turns off whenever you start typing.

NOTE: If the message, SENDING AUTO ID appears on your display, you may still
do any of the Superprint Pro80 LVD’s functions.

It is recommended that you leave Auto ID on all the time so it will always be available
in the event of an emergency. To turn off the Auto ID feature:
1.

Press

. CODE < AUTOMATIC> is displayed.

2.

Press

until AUTO ID < ON> is displayed.

3.

Press the

to change the setting to <OFF>.

4.

Press

to save this setting and move to the next option in the menu, or press

to exit the Options menu without making any changes.

Dial Using

The Superprint Pro80 LVD is set for touchtone dialing, which is correct for almost all
telephone lines. With the Dial option, you can change the setting to pulse dialing if
needed.
1.

Press

. CODE < AUTOMATIC> is displayed.

2.

Press

until DIAL USING < TONE> is displayed.

3.

To change the setting to <PULSE>, press the

.

4.

Press

to save this setting and move to the next option in the menu, or press

to exit the Options menu without making any changes.

Dialing Prefix

A dialing prefix can be handy if you frequently have to type a series of numbers before
dialing a phone number. This is common in office settings where a code such as “9” is
required to obtain an “outside line.” When a Dialing Prefix is saved, the Superprint
Pro80 LVD will always dial the prefix before dialing a number from the Dialing
Directory. The Dialing Prefix is not used when dialing from the keyboard.

Esc

Enter

Spacebar

Options

Esc

Enter

Spacebar

Options

Leave Auto ID on all the time.

If you choose to turn Auto ID off, the Superprint Pro80 LVD will not
automatically alert people that you are using a TTY. Without Auto ID,
you will need to type in order to send TTY tones or use the Voice

P E R S O N A L I Z I N G G E N E R A L O P T I O N S • 5 5

Advertising