Ultratec PRO80 - Manual (Page 44)

AUTO-ANSWER MEMORY
The Superprint Pro80 LVD will store approximately 100 short messages. The exact
number of messages depends on the amount of space available in shared memory. If the
memory does get full, “MESSAGE MEMORY FULL” is added to the last entry and the
Superprint Pro80 LVD stops saving messages. However, it continues to answer calls as
long as the printer is on. The total number of calls is still counted and all messages are
printed. If the printer is off and the memory is full, then the Superprint Pro80 LVD stops
answering calls.
TURNING AUTO-ANSWER ON
1. Press . If a new message has been saved that has not been reviewed, AA
ON 1 NEW MSG is displayed. If there aren’t any new messages, AA ON 0
NEW MSGS is displayed.
2. Leave the Superprint Pro80 LVD on to answer calls while you are away.
3. If the Superprint Pro80 LVD receives a call while you are away from home,
AA ON 1 NEW MSG will be displayed when you return.
TURNING AUTO-ANSWER OFF
Press . AUTO ANSWER OFF is briefly displayed. You can also press
to turn off the Superprint Pro80 LVD. To interrupt and take a call, press
.
REVIEWING MESSAGES
1. When Auto-Answer is on, the AA ON message is displayed.
If a new message has been left for you that has not been reviewed,
AA ON 1 NEW MSG is displayed. If there aren’t any new messages,
AA ON 0 NEW MSGS is displayed.
2. Press to begin reviewing your messages.
The display will tell you how many messages are saved and how much memory is
remaining. Then, each Auto-Answer message scrolls across the display. Each
message begins with five dashes ( - - - - - ) and the date and time that it was
received.
Why does my display look different?
If you have Caller ID on in addition to Auto-Answer, you will see more
information on your display. The display might look like this: 1 AA MSG
0 CALLS. For more information on Caller ID, please see Chapter 8 on
page 41.
Esc
On/Off
Auto-Answer
Auto-Answer
3 8 • U S I N G A U T O - A N S W E R