Turning off the auto-answer relay voice announcer, The remote message retrieval option, Saving a password – Ultratec PRO80 User Manual
Page 46: Reading auto-answer messages remotely
1.
Hold down the
key and press
. AA RINGS <2> is displayed.
2.
Type the number of desired rings or “T” for Toll Saver. You can also press the
. The number of rings (<2> through <9>) or <TS> is displayed.
3.
Press
to save this setting. AA RINGS SAVED is displayed.
TURNING OFF THE AUTO-ANSWER RELAY VOICE
ANNOUNCER
(See page 25 for information about the Auto-Answer Relay Voice Announcer.)
1.
Hold down the
key and press
. AA RINGS <2> is displayed.
2.
Press
until AA VOICE < ON> is displayed.
3.
Press the
to change the option to <OFF>. Then, press
.
AA VOICE OFF is displayed.
Enter
Spacebar
Auto-Answer
Program
Enter
Spacebar
Auto-Answer
Program
4 0 • U S I N G A U T O - A N S W E R
Can I check messages when I am away from home?
Yes, remote message retrieval allows you to use another TTY when you are
away from your Superprint Pro80 LVD to check your Auto-Answer
messages. In order to use this function you must first save a password in
your Superprint Pro80 LVD. You will be able to read your messages from
another TTY location only if a password has been saved.
THE REMOTE MESSAGE RETRIEVAL OPTION
Saving a Password
1.
Hold down the
key and press
. AA RINGS <2> is displayed.
2.
Press
until CHANGE PASSWORD <NO> is displayed.
3.
Press the
to change the option to <YES>. Then, press
. TYPE AA
PASSWORD> is displayed.
4.
Type your password. Your password can be up to 8 characters long and can include
letters and numbers only. There is room for only one password.
5.
Press
to save this setting. AA PASSWORD SAVED is displayed.
Reading Auto-Answer Messages Remotely
1.
Before you leave, press
to turn Auto-Answer on and make sure you
have saved a password.
Auto-Answer
Enter
Enter
Spacebar
Auto-Answer
Program