Ultratec PRO80 - Manual (Page 35)

Available User Preference Settings:
D
Do not dial thru Z Do not type recordings verbatim
V VCO on H HCO on
M Male CA F Female CA
B Braille A Do not announce Relay
X Do not explain Relay C Request calling card
E English language G German language
R French language S Spanish language
2 2-line VCO
For example: If VCO will be used when placing calls through relay, type the
letter, “V” in this menu. Then, the TRS will recognize calls as being VCO calls.
5. Press to move to the next menu option. CARRIER is displayed.
6. If you do not wish to specify a long distance provider, press . USER ID is
displayed.
If you wish to specify a long distance provider, you may fill in the carrier-of-choice
option. To do this, contact your TRS for the code for your preferred long distance
provider. Type this code and press
. USER ID is displayed.
You may also select a carrier of choice on a call-by-call basis by using a
10–10–XXX number. Simply type the desired 10–10–XXX prefix before the
number of the person you are trying to call. This overrides any preset carrier-of-
choice setting.
7. Do NOT make any changes to the USER ID setting unless told to do so by your
TRS. Press the
button to exit this menu.
Placing a Call Using Relay Dial with E-Turbo
1. Make sure the Superprint Pro80 is on. The Power light should be lit.
2. Press the button. TYPE NAME OR NUMBER is displayed.
3. Type the number of the person you wish to call and press .
4. DIALING RELAY... is displayed followed by the number of the TRS that you have
programmed for this button.
The call is automatically placed through the TRS. You may see some messages
such as the CA’s greeting or the status of your call being dialed.
5. When the person you are calling answers the phone, continue your conversation as
you would with any relay call.
Enter
Relay
Esc
Enter
Enter
Enter
C H A P T E R T I T L E • 2 9