VTech LS5145 - Manual (Page 108)

www.vtechphones.com 104
Troubleshooting
Problem Suggeston
My telephone system
does not work at all.
• Make sure the handset battery s nstalled and charged correctly (see page 4). For optmum daly
performance, return the handset to the telephone base after use.
• Make sure the power adapter s securely plugged nto an outlet not controlled by a wall swtch.
• Make sure the telephone line cord is plugged firmly into the telephone base and the telephone
wall jack.
• Reset the telephone base. Unplug the unt’s electrcal power and remove any spare batteres.
Wat for approxmately 15 seconds, then plug t back n. Allow up to one mnute for the handset
and telephone base to reset.
Remove and re-nsert the battery. If that stll does not work, t may be necessary to purchase a
new battery.
•
There is no dial tone. • Frst, try all the above suggestons.
• Move the handset closer to the telephone base. It mght be out of range.
• The telephone lne cord mght be malfunctonng. Try nstallng a new telephone lne cord.
• Dsconnect the telephone base from the telephone jack and connect a dfferent telephone. If
there s no dal tone on that telephone ether, the problem s n your wrng or local servce.
Contact your local telephone company.