VTech LS5145 - Manual (Page 49)

www.vtechphones.com 45
S
ys
te
m
s
etu
p
System setup
Clearng the voce
mal ndcaton
does not delete
any voce mal
messages.
If you subscrbe
to voce mal
servces, your
local telephone
company may alert
you to new voce
mal messages
wth a stutter
(broken) dal tone.
Contact your
local telephone
company for more
nformaton about
voce mal servce.
All handsets and
the telephone base
share the same
voce mal access
code, and ths
voce mal access
code can only be
set or changed
on the telephone
base.
•
•
•
•
Voice mail codes
The LS5145 allows you to program your voce mal functon codes so you can easly access voce
mal features by usng softkeys on the handset and the telephone base.
If a PIN or password s needed after dalng the voce mal code, press and hold the
# key to enter
a two-second dalng pause. A P appears on the screen after the last dgt of the code to ndcate a
pause has been added. If you wsh to add a pause longer than two seconds, press and hold # agan
to add another two-second pause.
To program your voice mail access number:
1. Press the
MENU softkey on the telephone base when n dle mode to enter the man menu.
Settngs
Language
LCD Contrast
Clear Voce Mal
SELECT
Clear Voce Mal
NO YES
Clear Voce Mal
Indcaton?
Clearing voice mail
If you subscrbe to voce mal servces provded by the local telephone
company, the MESSAGE light on the telephone base will flash and New
Voice Mail wll dsplay on the telephone base when you have a new voce
mal message. If your telephone system ndcates that there s voce mal, but
you are sure that you have no new voce mal messages, you can manually
turn off the voce mal ndcaton.
To manually turn off the
MESSAGE lght:
1. Press the MENU softkey when n dle mode to enter the man menu.
2. Press the UP and DOWN NavKeys to select Settings, then press the
SELECT softkey to enter the Settings menu.
3. Press the UP and DOWN NavKeys to hghlght Clear Voice Mail, then
press the SELECT softkey.
4. Press the YES softkey to clear the voice mail indication. A confirmation tone
wll sound and the screen wll show [ Voice Mail Indication cleared ].