System setup – VTech LS5145 User Manual
Page 50
www.vtechphones.com
46
2. Press the
UP and DOWN NavKeys to select Settings, then press the
SELECT softkey to enter the Settings menu.
3. Press the
UP and DOWN NavKeys to hghlght Voice mail codes, then
press the
SELECT softkey.
4. Press the
UP and DOWN NavKeys to hghlght Voice mail access, then
press the
SELECT softkey.
5. Use the dal pad to enter your access number.
Press the
ERASE softkey to delete a hghlghted character.
Press and hold the
#
key to enter a two-second dalng pause (f
necessary) and then enter your PIN or password.
6. Press the
SAVE softkey to save your settng.
To program additional voice mail function codes:
1. Follow steps 1 through 3 from
To program your voice mail access
number (see pages 45 and 46).
2. Press the
UP and DOWN NavKeys to hghlght one of the followng
optons, then press the
SELECT softkey:
Play Messages
Skip Message
Repeat Message
Delete Message
Msg Time Stamp
3. Use the dal pad to enter the code.
Press the
ERASE softkey to delete the hghlghted character.
4. Press the
SAVE softkey to save the settng.
•
•
•
•
•
•
•
•
System setup
Settngs
LCD Contrast
Clear Voce Mal
Voce Mal Codes
SELECT
Voce Mal access
Play Messages
Skp Message
SELECT
Voce Mal Codes
Voce Mal Codes
SAVE
Voce Mal access
ERASE
Voce Mal access
Play Messages
Skp Message
SELECT
Voce Mal Codes
The
LS5145 wll
only access your
voce mal servce
from the
HOME
lne.
•