Z Microsystems 8X - Manual (Page 12)

Doc# 27-0030UM Rev 1.0 Issued 12/04
12
STEP 3: CABLE CONNECTIONS
The picture below shows the rear of a TranzStor 8X RAID unit and the connection points
for these cables. TranzStor 8X confi gurations may vary.
1. Terminate external SCSI connectors
2. Connect SCSI Adapter to Host Computer’s SCSI adapter using a 68 pin external SCSI
cable.
3. Connect Serial CTRL A to the Host Computer’s COM 1 port using the modem cable.
4. Connect power cable.
Install LVD/SE Terminators
SCSI Adapter
Serial CTRL A AC Power Plug
INSTALLATION