Z Microsystems 8X - Manual (Page 23)

Doc# 27-0030UM Rev 1.0 Issued 12/04
23
Slide the locking catch to the right to allow
locking handle to spring open. Locking handle springs open.
Pull handle gently forward to eject the
TranzPak 7 off of the rear connector. Continue to gently pull handle to slide
the TranzPak 7 forward. The TranzPak 7
should slide over the grounding contacts
until it is half way out.
Take the TranzPak 7 by the main body and
pull straight out.
REMOVING THE TP7
OPERATIONS