Z Microsystems 8X - Manual (Page 17)

Doc# 27-0030UM Rev 1.0 Issued 12/04
17
OPERATIONS
STEP 8: ADD NEW LOGICAL DRIVE
After the TranzStor 8X system reboots, rescan the SCSI bus on the host computer by
right-clicking on the SCSI controller in the device manager.
Go to Administrative Tools>Computer Management>Disk Management. Click on “Disk
Management” to start up Write Signature and Upgrade Wizard. Follow the steps in the
Wizard.
NOTE: Th e following screens are Win2K screens, and may appear diff erently with
diff erent operating systems.