Z Microsystems 8X - Manual (Page 9)

Doc# 27-0030UM Rev 1.0 Issued 12/04
9
STEP 1: RAIL INSTALLATION
The 8X RAID will arrive with the slides unattached.
To attach the slides to the extension
brackets, use two panhead phillips screws
(part# 01-91622), two fl at washers (01-
91872), and two lock washers (01-92151).
Insert the screws through the slots of the
extension bracket and into the holes in
the outer slide member. Secure loosely
with fl at and lock washers. Do not tighten.
Repeat with the second slide assembly. Positioning the slide assembly on the
inside of the rack, secure the front of the
slide assembly to the front of the rack using
a fl at Phillips head screw (part #01-92087)
in the top position.
Secure the rear of the slide assembly to
the rear of the rack using two panhead
Phillips head screws (part #01-91622). Tighten the slide assembly screws using
a Phillips screwdriver and 3/8” ratchet.
Repeat rail installation for other side.
Outer Slide Member
Slide Extension Bracket
INSTALLATION