Z Microsystems 8X - Manual (Page 2)

Doc# 27-0030UM Rev 1.0 Issued 12/04
2
1. Use the power cable
supplied with the product
to help prevent interfer-
ence with radio and televi-
sion reception. The use
of cables and adapters
may cause interference
with electronic equipment
in the vicinity of this unit. 2. Changes or modifi -
cations not expressly
approved by Z Microsys-
tems could void user’s
warranty.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED AS PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLETS UNLESS ALL THREE PRONGS CAN BE FULLY
INSERTED
CAUTION
RISK OF ELECTRIC SHOCK - DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK OF UNIT). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED PERSONNEL.
This symbol warns the user that insulated voltage within the unit may have suffi cient
magnitude to cause electric shock. Therefore, it is dangerous to make any kind of
contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore it should be read carefully in
order to avoid any problems.
REGULATORY
TranzStor
8X