Yamaha PJP-100H - Manual (Page 26)

Talking with Multiple Locations
22
The information display and speaker output method are
variable depending on the settings in “Connection Mode”
(page 27) and “Speaker Mode” (page 29).
■ When “Speaker Mode” is set to “Divide”
The audio from each location is output from a different
position.
, and displayed before the IP address of
each location indicate the positions of the speakers where
the audio from respective locations are output.
y
• Also you can change the speaker output positions according to
locations, when the connection mode (page 27) is set to “Mesh”
and the speaker mode is set to “Divide”. See “Changing the
speaker output positions according to locations” (page 23).
• Each time you press , you can switch between IP address
and setting icon shown at the top of the display. (When using an
SIP server, the display switches between SIP address, setting
icon, and IP address.)
■ When “Speaker Mode” is other than
“Divide”
The audio from other locations is not divided according to
locations, but are mixed and output as monaural audio.
Simply the order of connections is displayed before the IP
addresses of other units.
y
See page 36 for the display during a call through the SIP server,
and see page 41 for the display in cascade connection.
Display and speaker output during
multiple connections
Menu :Address
192.168.0.10
192.168.100.20
192.168.100.30
192.168.100.40
IP address of this unit
IP address of other units
1 2 3 4 5 6 7 8 9 0 MUTE
LAN
VOL DC IN 12V IN AUDIO OUT 1 2 3 4 5 6 7 8 9 0 MUTE
LAN
VOL DC IN 12V IN AUDIO OUT
Positions in 4-location call Positions in 3-location call
Menu :Address
192.168.0.10
[1] 192.168.100.20
[2] 192.168.100.30
[3] 192.168.100.40
IP address of this unit
IP address of other units
01EN_00_PJP-100H_UCGB.book Page 22 Wednesday, August 23, 2006 3:04 PM