Yamaha PJP-100H - Manual (Page 54)

RESETTING THE UNIT
50
You can restore the factory settings of this unit.
Before restoring the factory settings, note the following.
• All of the settings that have the default settings are set to the
default settings.
• The data in the address book (page 33) and call history
(page 38) are cleared.
• Once the factory settings are restored, the previous settings
made by the user cannot be recalled.
■ Resetting using the keys on this unit
Follow the procedure below to restore the factory settings
using the keys on this unit.
1
Press in the initial display.
The menu screen appears.
2
Press or to select “1. Settings”, and
then press .
The “Settings” menu appears.
3
Press , and then press or to select
“4. Restore Factory Settings”.
4
Press .
The “Restore Settings” menu appears.
5
Select “1. Yes”, and then press .
The settings of this unit are reset to the factory
settings, and the “Settings” menu reappears.
To cancel resetting in the middle
In step 5, press , or press or to select “2. No”
and then press .
Resetting the Unit
Notes
1 2 3
4 5 6
7 8 9
0
MIC MUTE
LAN
VOL
DC IN 12V
IN AUDIO OUT
3. General Settings
2. Sound Settings
1. Network Settings
Settings
4. Restore Settings
3. General Settings
2. Sound Settings
Settings
2. No
1. Yes
Restore Settings
01EN_00_PJP-100H_UCGB.book Page 50 Wednesday, August 23, 2006 3:04 PM