Yamaha PJP-100H - Manual (Page 41)

37
CONF
IGUR
A
T
IO
NS
English
The SNTP server (time distribution server) enables to adjust the date and time information in this unit automatically at
constant intervals.
• The date and time of this unit cannot be adjusted without a SNTP server. In this case, note that the downloaded call history (page 38)
does not show correct date and time data.
• If the time data cannot be obtained from the SNTP server at the moment this unit is turned on or the designated SNTP server does not
exist at the moment, the time is not displayed on this unit.
• The synchronization with the SNTP server may not be available depending on the security settings of the LAN accommodating this
unit. To use an external SNTP server in this case, it is required to change the settings of the router, etc. Refer to the instruction manuals
for your router for details.
1
In the web menu, click “SNTP Server”.
The “SNTP Server” window appears.
2
In the “SNTP Server ID” field, enter the name
or IP address of the SNTP server to be used.
3
In the “SNTP Synchronization Interval” field,
select the desired interval for
synchronization with the SNTP server.
4
Click “Submit”.
The setting is registered and the top of the web menu
reappears.
Setting Date and Time
Notes
01EN_00_PJP-100H_UCGB.book Page 37 Wednesday, August 23, 2006 3:04 PM