Xerox NS-2260 - Manual (Page 102)

5.5.2.3 Advanced
Miscellaneous settings :
MAC Address Age-out Time : Type the number of seconds that an inactive MAC address remains in the
switch address table. The valid range is 300~765 seconds (must be multiple of 3). Default is 300 seconds.
Max bridge transmit delay bound control : Limit the packets queuing time in switch. If enabled and queuing time
expired, the queued packets will be dropped. Options - OFF (default), 1sec, 2sec, 4sec
Enable Low Queue Delay Bound : setting to limit the low priority packets queuing time in switch. If
enabled and queuing time expired, the low priority packets queued in switch will be sent.
Note: Make sure Max bridge transit delay bound control is enabled when Low Queue Delay Bound
control is set to ENABLE.
Max. Delay Time : max. low queuing time, value range 1 ~ 255 (2ms/unit)
Broadcast Storm Filter Mode : To configure broadcast storm control, enable it and set the upper
threshold applied to all ports. The threshold is the percentage of the port total bandwidth used by broadcast
traffic. When broadcast traffic for a port rises above the threshold set, broadcast storm protection becomes
active. The valid threshold values are 5%, 10%, 15%, 20%, 25% and Off.